ICT Product Distribution > Environment Monitoring System > E-1W > Compatible Sensors > Environmental Sensors > Tamper Switch
Environmental Sensors for E-1W
Tamper Switch
Tamper Switch
Product Code: E-TDS
- Tamper switch for drawers and alarm boxes.
- Sends activation signal when tamper switch is released.
- Silver-plated contacts ensure reliable long-term operation.
- High-impact white plastic case, screw terminals.
- Screw terminal
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- Maximum cable length: 1,000 ft (305 m).
- Normally-open contacts at rest, closed contacts when depressed.
- Operating temperature: -13 to 158°F (-25 to 70°C ).
- Dimensions (WxDxH): 2.74×1.12×0.63 in (70x28x16 mm),
| NTI Part # | Description |
|---|---|
| E-TDS | Tamper Switch |
All Products In This Category
ENVIROMUX
ENVIROMUX-2D
Small Enterprise Environment Monitoring System
ENVIROMUX-5D
Medium Enterprise Environment Monitoring System
ENVIROMUX-16D/-16DEL
Large Enterprise Environment Monitoring System
ENVIROMUX-MICRO-T/-TRHP
Micro Environment Monitoring System
ENVIROMUX-MINI-LXO
Mini Environment Monitoring System
ENVIROMUX-1W
Low-Cost Environment Monitoring System
E-MNG-SH
Self-Hosted Enterprise Environment Monitoring System Management Software
E-MNG-xxxx
Management Software for Enterprise Environment Monitoring Systems – Client/Server Architecture
SPDU-S2
Secure Remote Power Control Unit with Environmental Monitoring
PWR-RMT-RBT-LC
Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets