Spec-4-E-1W: Vibration & Glass Break Sensors

Environmental Sensors for E-1W

Vibration & Glassbreak Sensors



Product Code: E-VSSBD

For registering movement and shocks – sensed through surface to which it is mounted.
Trigger duration: 3.1 to 4.1 seconds
2-wire interface.
Screw terminal.
Operating temperature: 32 to 104°F (0 to 60°C)
Storage temperature: -22 to 140°F (-30 to 60°C)
Relative Humidity: 17 to 90% non-condensing RH.
Includes 5V/1A power supply.
Compatible with E-MINI-LXO and E-MICRO.
Mounting bracket included.
Dimensions without bracket WxDxH: 2×2.5×1.28 in (51x64x33 mm)
Dimensions without bracket WxDxH: 3.75×2.5×1.34 in (95x64x34 mm)
Regulatory approvals: CE, RoHS


NTI Part #	Description
E-VSSBD	Vibration Sensor – Registers Movement & Shocks



Product Code: E-GBS-P

Acoustically detects the cracking of common framed glass types such as plate, tempered, wired and laminate.
Adjustable sensitivity and digital signal processing for greater detection sensitivity and improved false alarm immunity.
Includes mounting hardware for wall and ceiling.
Detection range: 25 feet.
- Reduced by drapes and/or blinds.
Connect to RJ45 or digital input sensor ports.
Screw terminal
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 1,000 ft (305 m).
Powered by E-2D/5D/16D.