ICT Product Distribution > Environment Monitoring System > E-2D / E-5D / E-16D (-16DEL) > Compatible Sensors > Environmental Sensors > Air Flow/Velocity Sensors
Environmental Sensors for E-2D/5D/16D/16DEL
Air Flow/Velocity Sensors
Air Flow Sensor
Product Code: E-AFM
- Reliable mechanical solution for monitoring air flow.
- Reacts to any condition causing insufficient flow of air such as malfunctioning cooling fan, increased friction, or physical blockage.
- Ideal for direct monitoring of a cooling fan, HVAC duct, or under a raised floor.
- Switch contact is closed when air flow is >8.2 ft/s.
- Connection: 2x single strand AWG26, length 18 in.
- Maximum cable length: 1000 ft (305m)
- Regulatory approvals: RoHS
| NTI Part # | Description |
|---|---|
| E-AFM | Air Flow Sensor |
Low-Cost Air Velocity Sensor
Product Code: E-AV-LC-7
- Reliable sensor for measurement of air velocity.
- Flow range: 0 to 82 ft/s (0 to 25 m/s).
- Accuracy: ±1.6 ft/s (±0.5 m/s) from 0 to 49 ft/s (0 to 15 m/s) at 70°F (21°C).
- To avoid damaging the E-AV-LC sensor, it should only be operated where it will sense at least some air flow (≥ 8.2 ft/s (2.5 m/s)) daily.
- Includes mounting hardware.
- Operating temperature: 32 to 158°F (0 to 70°C).
- Probe dimensions: 6.3×0.6 inches (160×15 mm).
- Probe material: PA 2200 plastic.
- Length: 7 feet.
- Includes an RJ45 coupler to extend the sensor up to 1,000 feet using CATx cable (minimum 24AWG).
- MTBF: 1,387,280 hours.
- Current consumption: 15mA @ 5VDC, 60mA @ 12VDC.
- Powered by E-2D/5D/16D.
- Compatible with E-2D/5D/16D.
- E-2D: only compatible with Rev C units (features two power inputs).
- Regulatory approvals: CE, RoHS.
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
| NTI Part # | Description |
|---|---|
| E-AV-LC-7 | Low-Cost Air Velocity Sensor |
Air Velocity Sensor
Product Code: E-AV-K
- Reliable sensor for measurement of air velocity.
- Requires the E-S5VDC sensor converter to operate.
- Maximum cable length: 1000 ft (305m)
- Powered by E-2D/5D/16D.
- Flow range: 0-2000 ft/min (0-10 m/s).
- Accuracy: ±60 ft/min (0.3 m/s) + 4% of measured value.
- Dust resistant design.
- Includes mounting hardware.
- Operating temperature: -4 to 140°F (-20 to 60°C).
- Storage temperature: -22 to 140°F (-30 to 60°C).
- Operating and storage relative humidity: 5 to 95% non-condensing RH.
- Regulatory approvals: CE, RoHS.
- TAA compliant
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
| NTI Part # | Description |
|---|---|
| E-AV-K | Air Velocity Sensor |
| E-S5VDC | 5VDC Sensor Converter. Required to connect E-AV to E-xD |
All Products In This Category
ENVIROMUX
ENVIROMUX-2D
Small Enterprise Environment Monitoring System
ENVIROMUX-5D
Medium Enterprise Environment Monitoring System
ENVIROMUX-16D/-16DEL
Large Enterprise Environment Monitoring System
ENVIROMUX-MICRO-T/-TRHP
Micro Environment Monitoring System
ENVIROMUX-MINI-LXO
Mini Environment Monitoring System
ENVIROMUX-1W
Low-Cost Environment Monitoring System
E-MNG-SH
Self-Hosted Enterprise Environment Monitoring System Management Software
E-MNG-xxxx
Management Software for Enterprise Environment Monitoring Systems – Client/Server Architecture
SPDU-S2
Secure Remote Power Control Unit with Environmental Monitoring
PWR-RMT-RBT-LC
Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets