ICT Product Distribution > Environment Monitoring System > E-2D / E-5D / E-16D (-16DEL) > Compatible Sensors > Environmental Sensors > IP Surveillance Cameras
Environmental Sensors for E-2D/5D/16D/16DEL
IP Surveillance Cameras
High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera
Product Code: E-IPCAM-WHNPT-V4
- View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
- With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails or stored locally on a connected flash drive.
- A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
- ONVIF authentication must be disabled on the camera.
- Two-way audio with built-in microphone and speaker.
- IR night vision supported up to 32.8 feet (10 m).
- 1/2.7″ Progressive Scan CMOS sensor.
- Video codecs/Resolution:
- H.264/H.264B/H.265: 1920×1080 up to 30fps
- MJPEG: 1920×1080 up to 30fps
- Lens: 4 mm (0.16 in).
- Supports wireless 802.11b/g/n.
- Viewing Angle: 90°
- Pan and tilt:
- Pan: 360°
- Tilt: 90°
- Built-in motion detection.
- Camera sends snapshots via email when motion is detected.
- Power:
- Input: 100 to 240 VAC at 50 or 60 Hz
- Output: 5VDC, 1.5A external power adapter
- 10/100 Mbps Ethernet port for wired connections.
- Environmental
- Operating temperature: 14 to 113°F (-10 to 45°C).
- Operating humidity: Up to 95% non-condensing RH.
- Dimensions WxDxH: 4.66×3.94×4.13 in (118x100x105 mm).
- Compatible with the E-2D/5D/16D.
- Mounting hardware included.
- Regulatory approvals:
- CE, FCC, RoHS.
- TAA Compliant
| NTI Part # | Description |
|---|---|
| E-IPCAM-WHNPT-V4 | High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera |
Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE)
Product Code: E-IPCAM-HNPO-P
-
- View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
- With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert emails or stored locally on a connected flash drive.
- A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
- ONVIF authentication must be disabled on the camera.
- IR night vision supported up to 98.4 feet (30 m).
- 1/2.7″ 5-Megapixel Progressive Scan CMOS sensor.
- Video Compression: H.265, H.264
- Max resolution and frame rate:
- Main stream: 2592×1944 up to 20 fps, 2688×1520 up to 30 fps
- Sub stream: 704×576 up to 25 fps, 704×480 up to 30 fps
- Lens: 2.8 mm (0.11 in).
- Viewing Angle: 103°
- System compatibility: ONVIF
- Built-in motion detection.
- Auto-patrol preset positions: 4.
- Camera sends snapshots via email when motion is detected.
- 10/100 Mbps Ethernet port for wired connections.
- Power:
- Input: 100 to 240 VAC at 50 or 60 Hz
- Output: 12 VDC, 1A external power adapter (included)
- Max consumption: 5.6 W
- Power over Ethernet standards supported: IEEE 802.3af
- Operating and storage temperature: -40 to 140°F (-40 to 60°C).
- Dimensions WxDxH: 2.76×6.54×2.76 in (70x166x70 mm).
- Waterproof rating: IP67
- Compatible with the E-2D/5D/16D.
- Mounting hardware included.
- Regulatory approvals: CE, FCC, RoHS.
| NTI Part # | Description |
|---|---|
| E-IPCAM-HNPO-P | Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE) |
High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE)
Product Code: E-IPCAM-DHNPO-V2P
- View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
- Control the camera using the camera web interface accessible from the ENVIROMUX web interface.
- With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails or stored locally on a connected flash drive.
- A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
- 1/2.8″ Progressive Scan CMOS
- Video Compression: H.265/H.264/MJPEG
- Supports three simultaneous video streams
- 2MP resolution @ 30 fps
- Supports 1920×1080, 1280×960, 1280×720
- Night Vision IR Range: 98 feet ( 30 m)
- Lens: 4 mm (0.16 in)
- Viewing angle: 86.4°
- Pan: 0 to 355°
- Tilt: 0 to 75°
- Rotate: 0 to 355°
- Power:
- Input: 100 to 240 VAC at 50 or 60 Hz
- Output: 12 VDC, 1A external power adapter (included)
- Max consumption: 5 W
- Power over Ethernet standards supported: IEEE 802.3af
- 10/100 Mbps Ethernet port for wired connections.
- Micro SD memory card slot (up to 128 GB)
- System compatibility: ONVIF, ISAPI, SDK, Ehome
- Operating temperature: -22 to 140°F (-30 to 60°C).
- Dimensions WxH: 4.37×3.24″ (111×82 mm)
- Waterproof rating: IP67 (camera housing only)
- Compatible with E-2D/5D/16D.
- Regulatory approvals: CE, FCC, RoHS
| NTI Part # | Description |
|---|---|
| E-IPCAM-DHNPO-V2P | High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE) |
All Products In This Category
ENVIROMUX
ENVIROMUX-2D
Small Enterprise Environment Monitoring System
ENVIROMUX-5D
Medium Enterprise Environment Monitoring System
ENVIROMUX-16D/-16DEL
Large Enterprise Environment Monitoring System
ENVIROMUX-MICRO-T/-TRHP
Micro Environment Monitoring System
ENVIROMUX-MINI-LXO
Mini Environment Monitoring System
ENVIROMUX-1W
Low-Cost Environment Monitoring System
E-MNG-SH
Self-Hosted Enterprise Environment Monitoring System Management Software
E-MNG-xxxx
Management Software for Enterprise Environment Monitoring Systems – Client/Server Architecture
SPDU-S2
Secure Remote Power Control Unit with Environmental Monitoring
PWR-RMT-RBT-LC
Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets