ICT Product Distribution > KVM > KVM Switches > VGA KVM Switches > PRIMUX-UZR
PRIMUX-UZR
Product Code: PRIMUX-UZR
The PRIMUX®Zero-U VGA KVM Switch System allows you to control up to 64 computers without consuming rack space. The switch frees up valuable space by eliminating large KVM switchboxes and bulky hard-to-manage coax cables.
The PRIMUX system consists of two components: the User Station that connects to a keyboard, monitor and mouse, and Host Adapter that connects to a server. Up to 64 Host Adapters can be daisy-chained together providing user access to up to 64 servers. The User Stations and Host Adapters can be located as far as 1,000 feet from each other via CAT5/5e/6 UTP cable.
- A single, inexpensive CAT5/5e/6 UTP cable replaces bulky KVM cables.
- Interconnect multiple servers at different locations throughout a building. Servers can be the same or different platforms(PS/2, SUN, USB or serial).
- Ideal for hazardous/unsecured environments. User station can be located up to 1,000 feet (305 meters) from servers.
- Provides a simple daisy-chained wiring configuration.
- Easy to install and use with plug-and-play functionality.
- Hot-swap components with no disruption of server operation.
- Supports crisp and clear resolutions to 1920×1440.
- Dedicated microprocessors prevent computers from locking up, ensuring reliable control.
- Keep-alive keyboard/mouse emulation for flawless operation.
- Supports international keyboard layouts.
- OSD provides fine tuning for optimal video quality.
- Color-coded LEDs on both the local and remote units indicate power status and verify communication between the units.
- Automatically adjusts the video quality to compensate for varying lengths of CAT5/5e/6 cable.
- Configuration is saved and restored even if unit loses power.
User Station
Monitor
- Female 15-pin HD connector.
- Supports resolutions to 1920×1440.
- A multiscan VGA monitor is required to display the different video outputs from different platforms.
- Supports Separate and Composite TTL level sync.
- Supports the DDC2B protocol.
Devices
- Two female USB Type A and two female 6-pin miniDIN connectors.
- Keyboard and mouse are hot-pluggable.
- User keyboard and mouse must be of the same platform – both USB or PS/2.
- Supports international keyboard layouts.
- Supports all standard PS/2 keyboards and most USB keyboards with Windows or SUN keyboard layout.
- Supports standard 2-button PS/2 mice, as well as other styles.
- Supports most USB mice (up to 3 buttons).
- USB SUN 3-button mice are supported.
Power
- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
- Power consumption: 10 W
Dimensions
- WxDxH: 11x11x1.75 in (279x279x44 mm)
- Optional 1RU rackmount kit available (PRIMUX-RK-UZR)
Environmental
- Operating temperature: 32 to 104°F (0 to 40°C).
- Storage temperature: -22 to 140°F (-30 to 60°C).
- Operating /storage relative humidity: 5 to 90% non-condensing RH.
Regulatory Approvals
- CE, RoHS
- TAA compliant
| Cable | Distance | Maximum Resolution |
|---|---|---|
| CAT5/ CAT5e (UTP) | 1000 feet (305 meters) | 1024×768 at 60 Hz |
| 700 feet (213 meters) | 1280×1024 at 60 Hz | |
| 500 feet (152 meters) | 1600×1200 at 60 Hz | |
| 400 feet (122 meters) | 1920×1440 at 60 Hz | |
| CAT6 (UTP) | 800 feet (244 meters) | 1024×768 at 60 Hz |
| 600 feet (183 meters) | 1280×1024 at 60 Hz | |
| 500 feet (152 meters) | 1600×1200 at 60 Hz | |
| 350 feet (107 meters) | 1920×1440 at 60 Hz |
Host Adapters
Hosts
- A maximum of 64 host computers can be daisy-chained together.
- One platform-specific (PS/2, SUN, USB or serial) HA-x host adapter is required for each computer.
- HA-PS2
- Compatible with legacy PS/2 computers with VGA video.
- One male 15-pin HD and two male 6-pin miniDIN connectors.
- Dimensions WxDxH (in): 2.1×3.7×1.0
- HA-SUN
- Compatible with legacy SUN computers with VGA video.
- One male 15-pin HD and one male 8-pin miniDIN connectors.
- Dimensions WxDxH (in): 2.1×3.7×1.0
- HA-USB
- Compatible with USB computers (PC, SUN, MAC) with VGA video.
- One male 15-pin HD and one male USB Type A connectors
- Dimensions WxDxH (in): 2.1×3.7×1.0
- HA-RS
- Compatible with most serial devices with an RS232 port.
- One female RJ45 EIA-232 serial port connector.
- Supported signals: TXD, RXD, DSR, DTR, CTS, RTS
- Emulates an ASCII terminal – converts serial data from ASCII device into VGA video
- 800×600 @ 60 Hz signal.
- Screen size: 80 characters wide by 30 lines
- Selectable baud rate: up to 115200
- Dimensions WxDxH (in): 2.1×3.5×0.9
Power
- HA-PS2/HA-SUN/HA-USB: Power provided by the host computer.
- HA-RS: Power provided by the host serial device via USB Type A connector.
Environmental
- Operating temperature: 32 to 104°F (0 to 40°C).
- Storage temperature: -22 to 140°F (-30 to 60°C).
- Operating /storage relative humidity: 5 to 90% non-condensing RH.
Cables
- To daisy chain host adapters and user station, use CAT5/5e/6 UTP straight through cable for TIA/EIA-568B wiring with standard RJ45 connectors. Cables not included
Regulatory Approvals
- RoHS
- TAA compliant
On Screen Display (OSD)
- Locate and select computers by name, comment, index or ID.
- Displays the platform, name, and power status of the daisy-chained computers.
- Allows color skew compensation and video compensation fine tuning for optimal video quality.
- OS and software-independent.
Security
- Add or remove authorized users.
- Set individual user names and passwords for each user.
- Administrator can enable or disable all security features and select which computers each user can access.
Front Panel Interface
- Locally change ports with front panel buttons. Provides eight “favorites” buttons allowing the user to program buttons to select frequently used computers.
Keyboard
- Use the keyboard to command the user station to select ports or configure the Scan delay.
- Scan Mode automatically and sequentially displays the video from each powered-on computer.
- Command Mode allows the user to give instructions to the switch through the keyboard.
|
Application Diagram: VGA KVM Switch via CAT5
|
|
Application Diagram: Interconnect Multiple Servers at Different Locations
|
| NTI Part # | Description |
|---|---|
| PRIMUX-UZR | USB, PS2, SUN, Serial RS232 |
| NTI Part # | Description |
|---|---|
| HA-PS2 | PS/2 |
| HA-USB | USB |
| HA-SUN | SUN |
| HA-RS | RS232 |
| NTI Part # | Description |
|---|---|
| PRIMUX-RK-UZR | 1RU Rackmount Kit |
All Products In This Category
KVM Switches
We have variety of KVM Switches to choose from based on your requirements. Please choose below the type of interfaces for your KVM Switch requirement to go to the list.
DVI
Control multiple DVI sources with one keyboard, video monitor, and mouse by using KVM DVI Switches.
HDMI
HDMI KVM Switches allow users to access and control multiple computers with HDMI monitors using a USB keyboard & mouse.
DP
DisplayPort KVM switches offer flexible, ultra-high definition video support with our keyboard-mouse control functionality.
KM
Access and control USB Keyboard-Mouse operation on remote systems with KM switches.