ICT Product Distribution    >     KVM     >     KVM Switches     >     VGA KVM Switches     >     UNIMUX-USBV-xHD

UNIMUX-USBV-xxHD(UT)

High Density VGA USB KVM Switch with Optional Additional Transparent USB Connectors

UNIMUX-USBV-xxHD(UT)

HDUSBVEXT-xx-MM Cable

The UNIMUX™ High Density VGA USB KVM Switch allows a user to control up to 32 USB computers with one USB keyboard, USB mouse and VGA monitor. Dedicated internal microprocessors emulate keyboard and mouse presence to each attached CPU 100% of the time so all computers boot error-free.

Product Code: UNIMUX-USBV-xxHD(UT)

4-Port : UNIMUX-USBV-4HD

8-Port : UNIMUX-USBV-8HD

16-Port : UNIMUX-USBV-16HD

32-Port : UNIMUX-USBV-32HD

The UNIMUX™ High Density VGA USB KVM Switch allows a user to control up to 32 USB computers with one USB keyboard, USB mouse and VGA monitor. Dedicated internal microprocessors emulate keyboard and mouse presence to each attached CPU 100% of the time so all computers boot error-free.

  • The High Density Switch saves rack space
    • 4-, 8- and 16-port switches are 1RU in height.
    • 32-port switch is 2RU in height.
    • Rackmount kit included.
  • Features NTI’s patented true autoboot USB switching – all attached computers can be booted simultaneously.
  • Compatible with USB computers (PC, SUN and MAC).
  • Crisp and clear 1920×1200 (WUXGA) video resolution.
  • Equipped with OSD, RS232, and Ethernet.
  • High quality steel construction.
  • Flash upgradeable.
  • Cabling runs are simplified with NTI’s high density KVM switch cables.
  • Available options:
    • Two transparent USB ports
      • Supports any two USB 1.1 (low/full speed) devices, in addition to keyboard and mouse, such as a touch screen monitor, interactive white board, or CAC card reader.
    • USB only switches – no VGA video.

    Hosts

    • Female 15-pin HD connectors.
    • Supports USB computers with VGA video.
    • Multiplatform support: Windows 7/8/10/11, Windows Server 2008/2012/2016/2019/2022, Solaris, Linux, FreeBSD, and MAC OS 10/11/12.
    • Any legacy PS/2 or SUN computer can be connected by using a USB-PS2-R or USB-SUN-R.

    Monitor

    • Crisp and clear 1920×1200 resolution.
    • One female 15-pin HD connector.
    • A multiscan VGA monitor is required to display the different video outputs from different platforms.
    • Bandwidth is 150 MHz.

    Power

    • 100 to 240 VAC at 50 or 60 Hz via IEC connector.

    Dimensions

    • 4-, 8- and 16-port switches WxDxH (in):
      • 16.66×7.58×1.75 (without supplied rackmount kit)
      • 19×7.58×1.75 (with supplied rackmount kit)
    • 32-port switches WxDxH: 19×10.17×3.5 in (483x258x89 mm)

    Environmental

    • Operating temperature: 32 to 100°F (0 to 38°C)
    • Storage temperature: -22 to 140°F (-30 to 60°C)
    • Operating and Storage Relative Humidity: 5 to 90% non-condensing RH.

    MTBF
    NTI Part # Hours NTI Part # Hours
    UNIMUX-USBV-4HD 211,477 UNIMUX-USBV-16HD 133,913
    UNIMUX-USBV-8HD 196,238 UNIMUX-USBV-32HD 87,413

     

    Devices

    • Two female USB Type A connectors for keyboard and mouse.
      • Compatible with most USB keyboards and mice, including Microsoft USB Intellimouse®, Logitech Cordless Elite Duo keyboard/mouse, Gyration keyboard/mouse, Crystal Vision keyboard with touchpad, and IKEY combo keyboard/touchpad.
      • Keyboard and mouse are hot-pluggable.
    • UNIMUX-USBV-xHDUT: two additional transparent female USB Type A connectors for USB 1.1 (low/full speed) devices – USB touch screen monitor, CAC card reader, interactive whiteboard, barcode scanner, etc.
      • Connect any type of USB device – fully transparent USB connectors.
      • Switch USB 1.1 devices between connected computers.

    Regulatory Approvals

    • CE, RoHS
    • TAA compliant

    Cables

    • Interface cables between your computers and the switch are required for proper operation. (Cables not included)
      • Use HDUSBVEXT-xx-MM to connect computers to the switch.
        • Use USB male A to female A cables with HDUSBVEXT-xx-MM to extend USB beyond 15 feet.

    Front Panel Interface

    • Touch a button and be connected to a computer or change modes of operation.
    • LEDs indicate currently selected port and mode of operation.

    RS232 Control

    • Female RJ45 connector.
    • Baud rate 1200 to 115200.
    • Commands
      • CS – connects output with specific input.
      • RO – reads what input is connected to output.
      • RU – reads size of switch.

    Ethernet Control

    • Female RJ45 connector.
    • 10/100 BaseT Ethernet interface.
    • Supported protocol: Telnet.
    • Control can be done over Telnet.

    Telnet

    • Commands are similar to RS232 commands.
    • The telnet server listens on port 2005 (configurable).
      • Port 2005 is intended for a software control type session.

    Keyboard

    • Scan, Broadcast, or Command Modes are available from the keyboard.
    • Use the keyboard to command the switch box to select ports or configure the SCAN delay.

    On Screen Display (OSD)

    • Select computers by name with the On Screen Display (OSD).
    • Use keyboard or mouse to operate the switch from menus superimposed onto the monitor.
    • Names can be up to 12 characters long.
    • Power status of each computer is displayed.
    • View usage statistics – power-on cycles and hours of usage.
    • Helps screens assists users with the OSD.
    • Modify the size and position of the OSD.
    • OSD is built into the switch-no need to install additional hardware or software.
    • OS and software-independent.
    • Security
      • Advanced security included.
      • Each user password can be up to 15 characters long, and each switch can store up to 63 users.
      • Administrator can enable or disable all security features and select which computers each user can access.
      • Once security is enabled, a user or administrator must login in order to access any of the computers connected to the switch.

     

    Application Drawing: High Density VGA USB KVM Switch with Optional Additional Transparent USB Connectors

     

    How to control up to 32 USB computers with one USB keyboard, USB mouse & VGA monitor

     

     

    Application Diagram: Connect a CAC reader using the optional USB peripheral port

    CAC / Smart Card readers provide an additional level of authentication to create a more secure infrastructure. To comply with Homeland Security and DoD guidelines, or for added security, connect a CAC reader to the High Density USB KVM Switch using the optional USB connector.

     

     

    Application Diagram: Connect a SMART Board™ Interactive Whiteboard using the optional USB connector

     

    Connect a SMART Board Interactive Whiteboard to the UNIMUX High Density VGA USB KVM Switch using the optional USB connector. Simply connect the projector to the VGA Monitor input on the switch, and the SMART Board Interactive Whiteboard to the optional USB connector for an interactive touch screen experience in the classroom or collaborative work environment.

     

       

      High Density VGA USB KVM Switches
      NTI Part # Description
      UNIMUX-USBV-4HD 4 CPUs, 1RU
      UNIMUX-USBV-8HD 8 CPUs, 1RU
      UNIMUX-USBV-16HD 16 CPUs, 1RU
      UNIMUX-USBV-32HD 32 CPUs, 2RU

       

      High Density VGA USB KVM Switches with Additional Transparent USB Connectors
      NTI Part # Description
      UNIMUX-USBV-4HDUT 4 CPUs, 1RU
      UNIMUX-USBV-8HDUT 8 CPUs, 1RU
      UNIMUX-USBV-16HDUT 16 CPUs, 1RU
      UNIMUX-USBV-32HDUT 32 CPUs, 2RU

       

      High Density USB Switches USB ONLY, NO VGA VIDEO
      NTI Part # Description
      UNIMUX-USB-4HD 4 CPUs, 1RU
      UNIMUX-USB-8HD 8 CPUs, 1RU
      UNIMUX-USB-16HD 16 CPUs, 1RU

       

      Male 15-pin HD to Male 15-pin HD + Male USB Type A Interface Cable
      NTI Part # Description
      HDUSBVEXT-3-MM Male 15-pin HD to Male 15-pin HD + Male USB Type A Interface Cable, 3 ft
      HDUSBVEXT-6-MM Male 15-pin HD to Male 15-pin HD + Male USB Type A Interface Cable, 6 ft
      HDUSBVEXT-10-MM Male 15-pin HD to Male 15-pin HD + Male USB Type A Interface Cable, 10 ft
      HDUSBVEXT-15-MM Male 15-pin HD to Male 15-pin HD + Male USB Type A Interface Cable, 15 ft

      All Products In This Category

      KVM Switches

      We have variety of KVM Switches to choose from based on your requirements. Please choose below the type of interfaces for your KVM Switch requirement to go to the list.

      DVI

      Control multiple DVI sources with one keyboard, video monitor, and mouse by using KVM DVI Switches.

      HDMI

      HDMI KVM Switches allow users to access and control multiple computers with HDMI monitors using a USB keyboard & mouse.

      DP

      DisplayPort KVM switches offer flexible, ultra-high definition video support with our keyboard-mouse control functionality.

      KM

      Access and control USB Keyboard-Mouse operation on remote systems with KM switches.