ICT Product Distribution > Environment Monitoring System > E-2D / E-5D / E-16D (-16DEL) > Compatible Sensors > Environmental Sensors > Vibration & Glassbreak Sensors
Environmental Sensors for E-2D/5D/16D/16DEL
Vibration & Glassbreak Sensors
Vibration Sensor - Registers Movement & Shocks
Product Code: E-VSSBD
- For registering movement and shocks – sensed through surface to which it is mounted.
- Trigger duration: 3.1 to 4.1 seconds
- 2-wire interface.
- Screw terminal.
- Operating temperature: 32 to 104°F (0 to 60°C)
- Storage temperature: -22 to 140°F (-30 to 60°C)
- Relative Humidity: 17 to 90% non-condensing RH.
- Includes 5V/1A power supply.
- Compatible with E-MINI-LXO and E-MICRO.
- Mounting bracket included.
- Dimensions without bracket WxDxH: 2×2.5×1.28 in (51x64x33 mm)
- Dimensions without bracket WxDxH: 3.75×2.5×1.34 in (95x64x34 mm)
- Regulatory approvals: CE, RoHS
| NTI Part # | Description |
|---|---|
| E-VSSBD | Vibration Sensor – Registers Movement & Shocks |
Rugged Vibration Sensor – Detect Over- or Under-Vibration in Machinery
Product Code: E-VSSR-10
- For registering over- or under-vibration in machinery such as large motors, gear boxes, turbines, pumps, blowers, crushers, compressors, blenders, hammermils, and conveyors.
- Adjustable over/under alarm sensitivity: 0.1 to 2.2 in/s (2.5 to 55 mm/s) rms.
- Minimum vibration frequency (-3db): 10 Hz.
- Maximum vibration acceleration: ±1.76 oz (±50 g) peak.
- Isolated NPN output is fail-safe.
- Screw terminal.
- 10 ft attached cable.
- To connect to the RJ45 inputs on an ENVIROMUX system, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Cast aluminum enclosure is rated NEMA 4X.
- Includes 24V, 1.5A power supply.
- DIN rail mountable.
- Operating temperature: -40 to 185°F (-40 to 85°C).
- Dimensions WxDxH (in): 3.94×2.56×1.66 (100x65x42 mm).
| NTI Part # | Description |
|---|---|
| E-VSSR-10 | Rugged Vibration Sensor – Detet Over – or Under -Vibration in Machinery |
Fence Vibration Sensor
- Detects when individuals climb over or cut through chain link or wire mesh fences.
- Advanced built-in signal processor prevents false alarms.
- Four sensitivity settings to tune each sensor to a particular fence section and intrusion type.
- Two open-collector outputs – alarm and power failure.
- UV resistant case and epoxy sealed electronics provides maximum resistance to harsh environments.
- Rated NEMA 4X and UL94 5V.
- Use individually or chain units with each ranging from 40 to 60 feet away.
- Includes mounting brackets for installing the sensor to fence fabric.
- Screw terminals.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- Powered by E-2D/5D/16D.
- Operating temperature: -4 to 131°F (-20 to 55°C).
- Operating voltage: 9-15V DC.
- Dimensions WxDxH (in): 2.55×4.7×1.6 (65x119x41 mm)
| NTI Part # | Description |
|---|---|
| E-FENCE1 | Fence Vibration Sensor |
Glass Break Detection Sensor
Product Code: E-GBS-P
- Acoustically detects the cracking of common framed glass types such as plate, tempered, wired and laminate.
- Adjustable sensitivity and digital signal processing for greater detection sensitivity and improved false alarm immunity.
- Includes mounting hardware for wall and ceiling.
- Detection range: 25 feet.
- Reduced by drapes and/or blinds.
- Connect to RJ45 or digital input sensor ports.
- Screw terminal
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- Maximum cable length: 1,000 ft (305 m).
- Powered by E-2D/5D/16D.
| NTI Part # | Description |
|---|---|
| E-GBS-P |
Glass Break Detection Sensor |
All Products In This Category
ENVIROMUX
ENVIROMUX-2D
Small Enterprise Environment Monitoring System
ENVIROMUX-5D
Medium Enterprise Environment Monitoring System
ENVIROMUX-16D/-16DEL
Large Enterprise Environment Monitoring System
ENVIROMUX-MICRO-T/-TRHP
Micro Environment Monitoring System
ENVIROMUX-MINI-LXO
Mini Environment Monitoring System
ENVIROMUX-1W
Low-Cost Environment Monitoring System
E-MNG-SH
Self-Hosted Enterprise Environment Monitoring System Management Software
E-MNG-xxxx
Management Software for Enterprise Environment Monitoring Systems – Client/Server Architecture
SPDU-S2
Secure Remote Power Control Unit with Environmental Monitoring
PWR-RMT-RBT-LC
Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets