ICT Product Distribution > Environment Monitoring System > E-MINI-LXO > Compatible Sensors > Environmental Sensors > Door Contact Sensors
Environmental Sensors for E-MINI-LXO
Door Contact Sensors
Door Contact Sensor
Product Code: E-M-DCS3
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- Wide actuating gap, approximately 1.2″.
- Dimensions WxDxH (in): 0.6×0.7×2.5 (switch), 0.6×0.5×2.5 (magnet).
- MTBF: 100,000 hrs
- Operating temperature: 32 to 158°F (0 to 70°C).
- Regulatory approvals: CE, UL, RoHS
| NTI Part # | Description |
|---|---|
| E-M-DCS3 | Door Contact Sensor |
Door Contact Sensor, TAA Compliant
Product Code: E-M-DCS5-TAA
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D.
- Actuating gap: up to 1 inch (25 mm).
- Dimensions WxDxH (in):
- Switch: 0.34×0.38×2.00 in (9x10x51 mm).
- Magnet: 0.34×0.38×2.00 in (9x10x51 mm).
- MTBF: 10,000,000 hrs
- Operating temperature: -67 to 158°F (-55 to 70°C).
- Regulatory approvals: UL
- TAA Compliant.
| NTI Part # | Description |
|---|---|
| E-M-DCS5-TAA | Door Contact Sensor, TAA Compliant |
Plunger-Style Door Contact Sensor
Product Code: E-DCS-PS2
- Use to monitor access from sliding doors and windows.
- A captive magnet within the plunger activates a reed switch when the plunger is depressed.
- Plunger travel: 0.25″ (6mm)
- Includes mounting hardware.
- For normally closed circuit connection.
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an E-2D/5D/16D system.
- Maximum cable length: 1,000 ft
- Dimensions: 1.00×1.41×1.75
- Operating temperature: -13 to 158°F (-25v to 70°C)
- Regulatory approvals: UL
| NTI Part # | Description |
|---|---|
| E-DCS-PS2 | Plunger-Style Door Contact Sensor |
Rugged Door Contact Sensor
Product Code: E-DCSR-V2
- Monitors access with a magnetic bridge sensor (no special inserts necessary).
- Ideal for commercial and industrial installations in harsh environments.
- Heavy-cast metal housing with 3.06-feet armored cable.
- Floor-mounting hardware included.
- For normally open or normally closed circuit connected.
- Wide actuating gap up to 2.5 inches (63 mm).
- Connect to digital input on an E-2D/5D/16D.
- Operating temperature: : -67 to 158°F (-55 to 70°C)
- Dimensions WxDxH (in):
- Regulatory approvals: UL
| NTI Part # | Description |
|---|---|
| E-DCSR-V2 | Rugged Door Contact Sensor |
Rugged Door Contact Sensor with Universal-Style Magnet
Product Code: E-DCSR-U
- Monitors access with a magnetic bridge sensor (no special inserts necessary).
- Ideal for commercial and industrial installations in harsh environments.
- Heavy-cast metal housing with 3.06-feet armored cable.
- Floor-mounting hardware included.
- niversal-style magnet option has a smaller width and depth that provides greater installation flexibility.
- For normally open or normally closed circuit connected.
- Wide actuating gap up to 2.5 inches (63 mm).
- Screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: -40 to 150°F (-40 to 65°C)
- Dimensions WxDxH (in):
- Magnet: 3.13×0.81×2.13 (79x21x54 mm)
- Switch: 3.5×1.5×0.44 (89x38x11 mm)
- Regulatory approvals: UL
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
| NTI Part # | Description |
|---|---|
| E-DCSR-U | Rugged Door Contact Sensor with Universal-Style Magnet |
All Products In This Category
ENVIROMUX
ENVIROMUX-2D
Small Enterprise Environment Monitoring System
ENVIROMUX-5D
Medium Enterprise Environment Monitoring System
ENVIROMUX-16D/-16DEL
Large Enterprise Environment Monitoring System
ENVIROMUX-MICRO-T/-TRHP
Micro Environment Monitoring System
ENVIROMUX-MINI-LXO
Mini Environment Monitoring System
ENVIROMUX-1W
Low-Cost Environment Monitoring System
E-MNG-SH
Self-Hosted Enterprise Environment Monitoring System Management Software
E-MNG-xxxx
Management Software for Enterprise Environment Monitoring Systems – Client/Server Architecture
SPDU-S2
Secure Remote Power Control Unit with Environmental Monitoring
PWR-RMT-RBT-LC
Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets
PWR-RMT-RBT2-515R-LCV2
Low-Cost 2-Port Remote Power Reboot Switch with NEMA 5-15R Outlets